This part of IEC 60204 applies to electrical, electronic and programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner.
The purpose of this protocol is to validate the safety skill “maintain safe distance” by measurement. Its scope is limited to Highly Automated Agricultural Machines (HAAM). In this context, the skill “maintain safe distance” is often used to protect workers from injuries caused by collisions where the HAAM collides with a part of the human. The protocol validates that the stopping distance is never exceeded in a HAAM system when using a safety skill that detect objects and triggers a stop. The validation of this protocol requires that the reader has a distance measuring system available.
The purpose of this protocol is to validate the safety skill “limit interaction energy” by measurement. Its scope is limited to mobile platforms that used in Logistics and Manufacturing applications. In this context, the skill “limit interaction energy” can be used to protect workers from injuries caused by collisions where the mobile platform traps a part of the human body against a fixed obstacle. The validation of this protocol requires that the reader has a bio-fidel force and pressure measurement device.
The purpose of this protocol is to validate the safety skill “limit interaction energy” by measurement. Its scope is limited to mobile robot arms that used in Logistics and Manufacturing applications. In this context, the skill “limit interaction energy” is often used to protect workers from injuries caused by collisions where the mobile robot arm traps a part of the human body against a fixed obstacle. The validation of this protocol requires that the reader has a bio-fidel force and pressure measurement device available.
The purpose of this protocol is to test the skill “dynamic stability” of mobile platforms by measurement. Its scope is limited to mobile platforms used in industrial indoor applications. In this context, the objective is to protect workers from injuries caused by collisions where the mobile platform tilts. The validation of this protocol requires that the reader has access to an inclinometer.
This part of IEC 60204 applies to the application of electrical, electronic and programmableelectronic equipment and systems to machines not portable by hand while working, including agroup of machines working together in a co-ordinated manner.
IEC 60068-2-2:2007 Deals with dry heat tests applicable both to heat-dissipating and non heat-dissipating specimens. For non heat-dissipating specimens, Tests Bb and Bd do not deviate essentially from earlier issues. The object of the dry heat test is limited to the determination of the ability of components, equipment or other articles to be used, transported or stored at high temperature. These dry heat tests do not enable the ability of specimens to withstand or operate during the temperature variations to be assessed. In this case, it would be necessary to use IEC 60068-2-14 Test N: Change of temperature. The dry heat tests are subdivided as follows:- Dry heat test for non heat-dissipating specimens with gradual change of temperature, Bb.- Dry heat tests for heat-dissipating specimens with gradual change of temperature, Bd. with gradual change of temperature, specimen powered throughout, Be. The procedures given in this standard are normally intended for specimens that achieve temperature stability during the performance of the test procedure. The main changes from the previous edition are as follows: Tests Ba and Bc have been deleted since they were more severe tests than Test Nb, IEC 60068-2-14: Change of temperature. Secondly it was considered justified to delete the 3 % value on the temperature difference between the chamber air and the wall temperatures. Thirdly it is proposed that the test specimen be powered throughout the test where required; and, finally, the annexes have been removed.
This document provides guidance on the practical application of safety and lean manufacturing principles to machinery and manufacturing systems for improving performance, safety and quality by reducing injury and waste. The guidelines in this technical report assist machine tool users to minimize waste and risk associated with machinery and manufacturing systems, including individual and integrated machine tools and auxiliary components.
This Technical Report introduces three categories of inspections; conversational inspections, visual inspections, and technical inspections. Applying the appropriate category to existing inspections improves communication, safety culture, and risk reduction measures. Although each of the three categories provide a benefit, it is not necessary for all categories to be used. The template checklists which are included may be modified to produce “organizational specific” checklists by either internal or external subject matter experts
This standard applies to machines with a work envelope equal to or greater than two cubic meters (2 m3) or two meters of linear axis travel, or where personnel are regularly required to enter into the working envelope to perform work or tasks. This standard applies to large machines with a working envelope greater than two cubic meters (meters of travel). The requirements in this standard apply to all large machines, unless they are specifically covered in or by another standard. This document is intended to be used with both ANSI B11.0 and ANSI B11.19 to execute the risk assessment process and the risk reduction measures, respectively.
This standard provides requirements for use in developing effective safeguarding methods to protect people from injury due to inadvertent contact with mechanical power transmission apparatus. When specific safeguarding methods are listed, they are based on sound safety practices; however, alternatives that provide equivalent protection are acceptable. The use of personal protective equipment is recommended, where applicable, but its use does not negate provisions of this Standard.
Develop and maintain Standards for terminology, performance requirements, and related topics for robotic arms (manipulators).