SMPTE

This standard specifies the dimensions for the width, thickness, and curvature of 2-in video magnetic recording tape.

This standard specifies the frequency response and operating level for recorders and reproducers for audio 1 record for 2-in quadruplex video magnetic tape recording at 15 in/s and 7.5 in/s (381 mm/s and 190.5 mm/s), as defined in ANSI/SMPTE 6. It also specifies the field method of calibration of recorders and reproducers, utilizing the test tapes as defined in ANSI/SMPTE 8 and ANSI/SMPTE 11.

This standard specifies the nominal rates of travel of 2-in wide magnetic tape for quadruplex video magnetic tape recording.

This standard specifies the dimensions of reels in maximum capacities of 750, 1650, 3600, 5540, and 7230 ft designed to accommodate the maximum thickness of 2-in wide magnetic tape for television recording, as specified in ANSI/SMPTE 1.

This standard specifies both the locations for the edges of the video, audio, and tracking-control records, and the mechanical separation of the simultaneously recorded information of the video and audio records, as recorded at 15 and 7.5 in/s on 2-in quadruplex video magnetic tape.

(1.1) This standard specifies the dimensions of the camera aperture image and its relative position to the reference edge and the perforations of 16-mm motion-picture film. The location of the perforations is based on dimensions given in SMPTE 109. (1.2) This standard also specifies the position of the emulsion and the frame rate for 16-mm motion-picture film perforated one or two edges.

This standard specifies an audio frequency test tape to be used for adjusting the sensitivity and frequency response of audio 1 record (program audio track) and audio 2 record (cue track) of quadruplex video magnetic tape recorders operating at a tape speed of 15 in/s (381 mm/s).

This standard specifies the frequency response and operating level of recorders and reproducers for audio records for 1-in type B helical-scan video tape recording.

This standard specifies the general video record system, video pole tip locations, scanner parameters, scanner-guide locations, tape tension, and test conditions for 1-in type C helical-scan television analog recorders operating on the 525/60 monochrome or NTSC color systems.

This standard specifies the dimensions and location of recorded video, audio, and tracking-control records for 1-in type C helical-scan television analog recorders operating in the 525/60 monochrome or NTSC color systems.

This standard specifies the dimensions of a video cassette and a video magnetic tape intended for use with 1/2-in type G video systems operating at tape speeds of 40, 20, and/or 13.3 mm/s (1.57, 0.79, and/or 0.52 in/s).

This standard specifies the recommended sizes and dimensions of raw stock cores for 8-, 16-, 35-, 65-, and 70-mm motion-picture films.