Available Standards (996)
Showing standards 201 - 400
Encryption algorithms -- Part 5: Identity-based ciphers
This part of ISO/IEC 18033 specifies identity-based encryption mechanisms.
Encryption algorithms -- Part 5: Identity-based ciphers
This part of ISO/IEC 18033 specifies identity-based encryption mechanisms.
Encryption algorithms -- Part 6: Homomorphic encryption
This document specifies the following mechanisms for homomorphic encryption.
— Exponential ElGamal encryption;
— Paillier encryption.
Encryption algorithms -- Part 6: Homomorphic encryption
This document specifies the following mechanisms for homomorphic encryption.
— Exponential ElGamal encryption;
— Paillier encryption.
Enterprise integration — Framework for enterprise modelling
ISO 19439:2006 specifies a framework conforming to requirements of ISO 15704, which serves as a common basis to identify and coordinate standards development for modelling of enterprises, emphasising,
Enterprise modelling and architecture - Requirements for enterprise-referencing architectures and methodologies
This document specifies a reference base of concepts and principles for enterprise architectures that enable enterprise development, enterprise integration, enterprise interoperability, human under
Enterprise modelling and architecture — Constructs for enterprise modelling
This document identifies and specifies constructs necessary for users that model enterprises in conformance with ISO 19439.This document focuses on, but is not restricted to, engineering and the integ
Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling)
This International Standard specifies requirements for self-declared environmental claims, including statements, symbols and graphics, regarding products.
Environmental management - Life cycle assessment - Data documentation format
This document specifies those terms, concepts and principles considered necessary to address stakeholder concerns and to carry out enterprise creation programmes as well as any incremental change p
Environmental management - Life cycle assessment - Requirements and guidelines (ISO 14044:2006 + Amd 1:2017 + Amd 2:2020); German version EN ISO 14044:2006 + A1:2018 + A2:2020
This document specifies requirements and provides guidelines for life cycle assessment. It coves life cycle assessment studies and life cycle inventory studies.
Environmental management for concrete and concrete structures - Part 8: Environmental labels and declarations
This document provides a general principle, procedures and requirements for environmental labels and declarations for concrete and concrete structures.
Ergonomics of human-system interaction - Part 125: Guidance on visual presentation of information
ISO 9241-125:2017 provides guidance for the visual presentation of information controlled by software, irrespective of the device.
Ergonomics of human-system interaction - Part 161: Guidance on visual user-interface elements
ISO 9241-161:2016 describes visual user-interface elements presented by software and provides requirements and recommendations on when and how to use them.
Ergonomics of human-system interaction - Part 380: Survey result of HMD (Head-Mounted Displays) characteristics related to human-system interaction
This document provides information based on a study of the characteristics of head-mounted displays (HMDs) regarding the ergonomics of human-system interaction.
Ergonomics of human-system interaction - Part 393: Structured literature review of visually induced motion sickness during watching electronic images
This document gives the scientific summaries of visually induced motion sickness resulting from images presented visually on or by electronic display devices.
Ergonomics of human-system interaction - Part 394: Ergonomic requirements for reducing undesirable biomedical effects of visually induced motion sickness during watching electronic images
This document establishes the requirements and recommendations for image contents and electronic display systems to reduce visually induced motion sickness (VIMS), while viewing images on electronic d
Ergonomics of human-system interaction - Part 430: Recommendations for the design of non-touch gestural input for the reduction of biomechanical stress
This document provides guidance on the design, selection and optimization of non-contacting hand and arm gestures for human-computer interaction.
Ergonomics of human-system interaction - Part 940: Evaluation of tactile and haptic interactions
This document - describes the types of methods that can be used for the evaluation of haptic devices and of systems that include haptic devices, - specifies a procedure for the evaluation of haptic in
Ergonomics of human-system interaction — Part 810: Robotic, intelligent and autonomous systems
This document addresses:— physically embodied RIA systems, such as robots and autonomous vehicles with which users will physically interact.
Ergonomics of human-system interaction - Part 910: Framework for tactile and haptic interaction
ISO 9241-910:2011 provides a framework for understanding and communicating various aspects of tactile/haptic interaction.
Ergonomics of human-system interaction - Part 920: Guidance on tactile and haptic interactions
ISO 9241-920:2009 gives recommendations for tactile and haptic hardware and software interactions.
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 15536-1:2006 provides temperature threshold values for burns that occur when human skin is in contact with a hot solid surface.
Ergonomics principles in the design of work systems
ISO 6385:2016 establishes the fundamental principles of ergonomics as basic guidelines for the design of work systems and defines relevant basic terms.
Evaluation criteria for IT security -- Part 1: Introduction and general model
This part of ISO/IEC 15408 establishes the general concepts and principles of IT security evaluation and specifies the general model of evaluation given by various parts of the International Standa
Evaluation criteria for IT security -- Part 1: Introduction and general model
This part of ISO/IEC 15408 establishes the general concepts and principles of IT security evaluation and specifies the general model of evaluation given by various parts of the International Standa
Evaluation criteria for IT security -- Part 2: Security functional components
This part of ISO/IEC 15408 defines the required structure and content of security functional components for the purpose of security evaluation.
Evaluation criteria for IT security -- Part 2: Security functional components
This part of ISO/IEC 15408 defines the required structure and content of security functional components for the purpose of security evaluation.
Evaluation criteria for IT security -- Part 3: Security assurance components
This part of ISO/IEC 15408 defines the assurance requirements of ISO/IEC 15408.
Evaluation criteria for IT security -- Part 3: Security assurance components
This part of ISO/IEC 15408 defines the assurance requirements of ISO/IEC 15408.
Financial services
Standardization in the field of banking, securities and other financial services.
Framework for establishing trustworthy supply chains
This document will provide guidance for developing, implementing, monitoring and improving infrastructure resilience in order to help ensure the continuity and effective outcomes of critical servic
Geographic information - BIM to GIS conceptual mapping (B2GM)
This document defines the conceptual framework and mechanisms for mapping information elements from Building Information Modelling (BIM) to Geographic Information Systems (GIS) to access the required
Geographic information - Calibration and validation of remote sensing imagery sensors and data - Part 1: Optical sensors
This document is the first of a family of standards. ISO/TS 19159-1:2014 defines the calibration and validation of airborne and spaceborne remote sensing imagery sensors.
Geographic information - Classification systems - Part 1: Classification system structure, with technical corrigendum
This document is the first of a family of standards.
Geographic information - Conceptual schema language
ISO 19103:2015 provides rules and guidelines for the use of a conceptual schema language within the context of geographic information.
Geographic information - Conformance and testing
This International Standard specifies the framework, concepts and methodology for testing and criteria to be achieved to claim conformance to the family of ISO geographic information standards.
Geographic information - Content components and encoding rules for imagery and gridded data - Part 1: Content model
This document is the first of a family of standards.
Geographic information - Core profile of the spatial schema
ISO 19137:2007 defines a core profile of the spatial schema specified in ISO 19107 that specifies, in accordance with ISO 19106, a minimal set of geometric elements necessary for the efficient creatio
Geographic information - Cross-domain vocabularies
This document establishes a methodology for cross-mapping vocabularies. It also specifies an implementation of ISO 19135-1:2015 for the purpose of registering cross-mapped vocabulary entries.
Geographic information - Data product specifications
This document describes requirements for the specification of geographic data products, based upon the concepts of other International Standards in the ISO 19100 family of standards.
Geographic information - Data quality - Part 1: General requirements
This document is the first of a family of standards. This document establishes the principles for describing the quality of geographic data. It:
Geographic information - Discrete Global Grid Systems Specifications - Part 1: Core Reference System and Operations, and Equal Area Earth Reference System
This document is the first of a family of standards. This document supports the definition of:
Geographic information - Encoding
ISO 19118:2011 specifies the requirements for defining encoding rules for use for the interchange of data that conform to the geographic information in the set of International Standards known as the
Geographic information - Feature concept dictionaries and registers
This document specifies a schema for feature concept dictionaries to be established and managed as registers.
Geographic information - Filter encoding
ISO 19143:2010 describes an XML and KVP encoding of a system neutral syntax for expressing projections, selection and sorting clauses collectively called a query expression.
Geographic Information - Gap-analysis: mapping and describing the differences between the current GDF and ISO/TC 211 conceptual models to suggest ways to harmonize and resolve conflicting issues
This document maps and describes the differences between GDF (ISO 20524 series), from ISO/TC 204, and conceptual models from the ISO 19100 family, from ISO/TC 211, and suggests ways to harmonize and r
Geographic information - Geodetic references - Part 1: International terrestrial reference system (ITRS)
This document is the first of a family of standards.
Geographic information - Geodetic register
This document defines the management and operations of the ISO geodetic register and identifies the data elements, in accordance with ISO 19111:2007 and the core schema within ISO 19135‑1:2015, requir
Geographic information - Geography Markup Language (GML) - Part 1: Fundamentals
This document is the first of a family of standards.
Geographic information - Geospatial API for features - Part 1: Core
This document is the first of a family of standards.
Geographic information - Imagery and gridded data
This Technical Report reviews the manner in which raster and gridded data is currently being handled in the Geomatics community in order to propose how this type of data should be supported by geograp
Geographic information - Imagery sensor models for geopositioning - Part 1: Fundamentals
This document is the first of a family of standards.
Geographic information - Imagery, gridded and coverage data framework
ISO/TS 19129:2009 defines the framework for imagery, gridded and coverage data.
Geographic information - Land Administration Domain Model (LADM)
The ISO 19152:2012 standard:
Geographic information - Linear referencing
This document specifies a conceptual schema for locations relative to a one-dimensional object as measurement along (and optionally offset from) that object.
Geographic information - Location-based services - Multimodal routing and navigation
ISO 19134:2006 specifies the data types and their associated operations for the implementation of multimodal location-based services for routing and navigation.
Geographic information - Location-based services - Reference model
ISO 19132:2007 defines a reference model and a conceptual framework for location-based services (LBS), and describes the basic principles by which LBS applications may interoperate.
Geographic information - Location-based services - Tracking and navigation
ISO 19133:2005 describes the data types, and operations associated with those types, for the implementation of tracking and navigation services.
Geographic information - Metadata - Part 1: Fundamentals
This document is the first of a family of standards. ISO 19115-1:2014 defines the schema required for describing geographic information and services by means of metadata.
Geographic information - Methodology for feature cataloguing
ISO 19110:2016 defines the methodology for cataloguing feature types.
Geographic information - Observations and measurements
This document defines a conceptual schema for observations, for features involved in the observation process, and for features involved in sampling when making observations.
Geographic information - Ontology - Part 1: Framework
This document is the first of a family of standards. ISO/TS 19150-1:2012 defines the framework for semantic interoperability of geographic information.
Geographic information - Place Identifier (PI) architecture
This document is the first of a family of standards. ISO 19155:2012 specifies an architecture that defines a reference model with an encoding method for an identifier of a place.
Geographic information - Portrayal
ISO 19117:2012 specifies a conceptual schema for describing symbols, portrayal functions that map geospatial features to symbols, and the collection of symbols and portrayal functions into portrayal c
Geographic information - Positioning services
This document specifies the data structure and content of an interface that permits communication between position-providing device(s) and position-using device(s) enabling the position-using device(s
Geographic information - Preservation of digital data and metadata - Part 1: Fundamentals
This document is the first of a family of standards. ISO 19165-1:2018 defines a preservation metadata extension of ISO 19115‑1.
Geographic information - Procedures for item registration - Part 1: Fundamentals, with amendment
This document is the first of a family of standards.
Geographic information - Profiles
ISO 19106:2004 is intended to define the concept of a profile of the ISO geographic information standards developed by ISO/TC 211 and to provide guidance for the creation of such profiles.
Geographic information - Quality assurance of data supply
ISO/TS 19158:2012 provides a framework for quality assurance specific to geographic information.
Geographic information - Reference model - Part 1: Fundamentals
This document is the first of a family of standards. ISO 19101-1:2014 defines the reference model for standardization in the field of geographic information.
Geographic information - Referencing by coordinates
This document defines the conceptual schema for the description of referencing by coordinates. It describes the minimum data required to define coordinate reference systems.
Geographic information - Registry of representations of geographic point location
ISO 19145:2013 specifies the process for establishing, maintaining and publishing registers of representation of geographic point location in compliance with ISO 19135.
Geographic information - Rights expression language for geographic information - GeoREL
ISO 19149:2011 defines an XML-based vocabulary or language to express rights for geographic information in order that digital licenses can be created for such information and related services.
Geographic information - Rules for application schema
ISO 19109:2015 defines rules for creating and documenting application schemas, including principles for the definition of features.
Geographic information - Schema for coverage geometry and functions - Part 1: Fundamentals
This document is the first of a family of standards. This document defines a conceptual schema for coverages.
Geographic information - Schema for moving features
ISO 19141:2008 defines a method to describe the geometry of a feature that moves as a rigid body. Such movement has the following characteristics.
Geographic information - Services
ISO 19119:2016 defines requirements for how platform neutral and platform specific specification of services shall be created, in order to allow for one service to be specified independently of one or
Geographic information - Simple feature access - Part 1: Common architecture
This document is the first of a family of standards. ISO 19125-1:2004 establishes a common architecture for geographic information and defines terms to use within the architecture.
Geographic information - Spatial referencing by geographic identifiers
This document defines the conceptual schema for spatial references based on geographic identifiers.
Geographic information - Spatial schema
This document specifies conceptual schemas for describing the spatial characteristics of geographic entities, and a set of spatial operations consistent with these schemas.
Geographic information - Temporal schema, with technical corrigendum
ISO 19108:2002 defines concepts for describing temporal characteristics of geographic information.
Geographic information - Terminology
ISO 19104:2016 specifies requirements for the collection, management and publication of terminology in the field of geographic information. The scope of this document includes:
Geographic information - Transfer Nodes
ISO 19147:2015 specifies the data types and code lists associated with those types for the implementation of transfer nodes and their services in transport modelling and location based services.
Geographic information - Ubiquitous public access - Reference model
ISO 19154:2014 defines a reference model for ubiquitous public access (UPA) to geographic information. This reference model uses standard concepts from both the Open distributed processing ?
Geographic information - Web Feature Service
ISO 19142:2010 specifies the behaviour of a web feature service that provides transactions on and access to geographic features in a manner independent of the underlying data store.
Geographic information - Web map server interface
ISO 19128:2005 specifies the behaviour of a service that produces spatially referenced maps dynamically from geographic information.
Geographic information - Well-known text representation of coordinate reference systems
This document defines the structure and content of a text string implementation of the abstract model for coordinate reference systems described in ISO 19111.
Geographic information - XML schema implementation - Part 1: Encoding rules
This document is the first of a family of standards. This document defines XML based encoding rules for conceptual schemas specifying types that describe geographic resources.
GIS (geospatial) / BIM interoperability
This document investigates barriers and proposes measures to improve interoperability between geospatial and BIM domains, namely, to align GIS standards developed by ISO/TC 211 and BIM standards devel
Graphic technology - Prepress data exchange - Preparation and visualization of RGB images to be used in RGB-based graphics arts workflows
ISO 16760:2014 specifies requirements for an RGB workflow for graphic arts printing based on the use of reflection prints (RGB Reference Prints) as the evaluation vehicle for coloured images.
Graphic technology - Vocabulary - Part 1: Fundamental terms
This document is the first of a family of standards. ISO 12637-1:2006 defines a set of fundamental terms that can be used in the drafting of other International Standards for graphic technology.
Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communication
This document specifies principles, requirements and guidelines for the quantification and reporting of the carbon footprint of a product (CFP), in a manner consistent with International Standards
Guidance for developing security and privacy functional requirements based on ISO/IEC 15408
This document provides guidance for:
— selecting and specifying security functional requirements (SFRs) from ISO/IEC 15408-2 to protect Personally Identifiable Information (PII);
Guidance for developing security and privacy functional requirements based on ISO/IEC 15408
This document provides guidance for:
— selecting and specifying security functional requirements (SFRs) from ISO/IEC 15408-2 to protect Personally Identifiable Information (PII);
Guidance for the production of protection profiles and security targets
This document provides guidance relating to the construction of Protection Profiles (PPs) and Security Targets (STs) that are intended to be compliant with the third edition of ISO/IEC 15408 (all p
Guidance for the production of protection profiles and security targets
This document provides guidance relating to the construction of Protection Profiles (PPs) and Security Targets (STs) that are intended to be compliant with the third edition of ISO/IEC 15408 (all p
Guidance on the integration of IoT and digital twins in data spaces
This document provides guidance on the integration of IoT systems and digital twins in data spaces.
Guidelines for cybersecurity
This International Standard provides guidance for improving the state of Cybersecurity.
It provides:
— an overview of Cybersecurity,
Guidelines for cybersecurity
This International Standard provides guidance for improving the state of Cybersecurity.
It provides:
— an overview of Cybersecurity,
Guidelines for establishing a Framework for Trust and Interoperability
This document establishes a framework for a trustworthy environment for information processing and communication that protects integrity along the supply chain of physical and related electronic do
Guidelines for establishing interoperability among independently functioning product identification and related authentication systems
This document establishes a framework for identification and authentication systems. It provides recommendations and best practice that include:
Guidelines for establishing interoperability of object identification and authentication systems
This document gives guidelines for establishing interoperability among independently functioning product identification and related authentication systems, as described in ISO 16678.
Guidelines for selection and performance evaluation of authentication solutions for material goods
This document gives guidelines for performance criteria and an evaluation methodology for authentication solutions that aim to unambiguously establish material good authenticity and integrity throu
Guidelines for the use and management of Trusted Third Party services
Associated with the provision and operation of a Trusted Third Party (TTP) are a number of security-related issues for which general guidance is necessary to assist business entities, developers an
Guidelines for the use and management of Trusted Third Party services
Associated with the provision and operation of a Trusted Third Party (TTP) are a number of security-related issues for which general guidance is necessary to assist business entities, developers an
Health informatics — International patient summary
This document defines the core data set for a patient summary document that supports continuity of care for a person and coordination of their healthcare.
Identification cards -- ICC-managed devices -- Part 4: Test methods for logical characteristics
This document specifies the test methods used for conformity testing, to determine whether an ICC with at least one ICC-managed device is considered to conform with the specifications of ISO/IEC 18
Identification cards -- ICC-managed devices -- Part 4: Test methods for logical characteristics
This document specifies the test methods used for conformity testing, to determine whether an ICC with at least one ICC-managed device is considered to conform with the specifications of ISO/IEC 18
Identification cards -- Integrated circuit card programming interfaces -- Part 1: Architecture
ISO/IEC 24727 specifies a set of programming interfaces and protocols enabling interactions between integrated circuit cards (ICCs) and applications resident on a variety of computer platforms.
Identification cards -- Integrated circuit card programming interfaces -- Part 1: Architecture
ISO/IEC 24727 specifies a set of programming interfaces and protocols enabling interactions between integrated circuit cards (ICCs) and applications resident on a variety of computer platforms.
Identification cards -- Integrated circuit cards -- Part 3: Cards with contacts -- Electrical interface and transmission protocols
ISO/IEC 7816-3:2006 specifies the power and signal structures, and information exchange between an integrated circuit card and an interface device such as a terminal.
Identification cards -- Integrated circuit cards -- Part 3: Cards with contacts -- Electrical interface and transmission protocols
ISO/IEC 7816-3:2006 specifies the power and signal structures, and information exchange between an integrated circuit card and an interface device such as a terminal.
Identification cards -- Integrated circuit cards -- Part 9: Commands for card management
ISO/IEC 7816-9:2017 specifies interindustry commands for card, file and other structure management, i.e. data object and security object.
Identification cards -- Integrated circuit cards -- Part 9: Commands for card management
ISO/IEC 7816-9:2017 specifies interindustry commands for card, file and other structure management, i.e. data object and security object.
Identification cards -- Integrated circuit cards -- Privacy-enhancing protocols and services
ISO/IEC 19286:2018 aims to normalize privacy-enhancing protocols and services by
Identification cards -- Integrated circuit cards -- Privacy-enhancing protocols and services
ISO/IEC 19286:2018 aims to normalize privacy-enhancing protocols and services by
Industrial automation systems and integration - COLLADA (TM) digital asset schema specification for 3D visualization of industrial data
This document describes the COLLADA schema.
Industrial automation systems and integration - Integration of life cycle data for process plants including oil and gas production facilities - Part 10: Conformance testing
This document defines the principles and methods for conformance testing of software implementations of ISO 15926.
Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 12: Life-cycle integration ontology represented in Web Ontology Language (OWL)
ISO/TS 15926-12:2018 specifies an ontology for the integration of industrial data throughout its life-cycle. The ontology is represented in Web Ontology Language (OWL).
Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 4: Initial reference data
This document specifies the initial set of core reference data items which can be used to record information about process plants, including oil and gas production facilities.
Industrial automation systems and integration - JT file format specification for 3D visualization
ISO 14306:2017 defines the syntax and semantics of a file format for the 3D visualization and interrogation of lightweight geometry and product manufacturing information derived from CAD systems, usin
Industrial automation systems and integration - Parts library - Part 1: Overview and fundamental principles
This document provides guidance in addition to the conformance in the parts.
Industrial automation systems and integration - Parts library - Part 20: Logical resource; Logical model of expressions
This part of ISO 13584 specifies:
— an EXPRESS schema for generic expressions;
Industrial automation systems and integration - Parts library - Part 24: Logical resource: Logical model of supplier library
ISO 13584-24:2003 provides generic EXPRESS resource constructs that support the description of different kinds of information about supplier libraries.
Industrial automation systems and integration - Parts library - Part 25: Logical resource: Logical model of supplier library with aggregate values and explicit content
ISO 13584-25:2004 provides generic EXPRESS resource constructs that support the description of aggregate data types and values occurring in supplier libraries.
Industrial automation systems and integration - Parts library - Part 26: Logical resource: Information supplier identification
This part of ISO 13584 specifies a supplier code to identify the information suppliers of the contents of
Industrial automation systems and integration - Parts library - Part 31: Implementation resources: Geometric programming interface
This part of ISO 13584 specifies an application programming interface that enables an application program
Industrial automation systems and integration - Product data representation and exchange - Part 1: Overview and fundamental principles
This document is the first of a family of standards. This document provides an overview of ISO 10303.
Industrial automation systems and integration - Product data representation and exchange - Part 21: Implementation methods: Clear text encoding of the exchange structure
ISO 10303-21:2016 specifies an exchange format that allows product data described in the EXPRESS language to be transferred from one computer system to another.
Industrial automation systems and integration - Product data representation and exchange - Part 225: Application protocol: Building elements using explicit shape representation
This part of ISO 10303 specifies the use of the integrated resources necessary for the scope and information requirements for the exchange of building element shape, property, and spatial configuratio
Industrial automation systems and integration - Product data representation and exchange - Part 46: Integrated generic resource: Visual presentation
ISO 10303-46 specifies the integrated resource constructs for Visual presentation. ISO 10303-46 specifies the integrated resources for the visualization of displayable product information.
Industrial automation systems and integration —
Integration of life-cycle data for process plants including oil and gas production facilities — Part 14: Data model adapted for OWL2 Direct Semantic
Industrial automation systems and integration — Formal semantic models for the configuration of global production networks
This document specifies a formal logic-based concept specialization approach to support the development of manufacturing reference models that underpin the necessary business specific knowledge mod
Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 13: Integrated asset planning life-cycle
ISO 15926-13:2018 specifies an ontology for asset planning for process plants, including oil and gas production facilities.
Industrial automation systems and integration — Product data representation and exchange
ISO 10303 is an ISO standard for the computer-interpretable representation and exchange of product manufacturing information.
Industrial automation systems and integration — Standardized procedures for production systems engineering — Part 3: Information flows in production planning processes
ISO 18828-3:2017 describes the information flows identified for each planning discipline within production planning, according to ISO 18828‑2.
Industrial trucks — Safety requirements and verification — Part 4: Driverless industrial trucks and their systems
This document specifies safety requirements and the means for their verification for driverless industrial trucks (hereafter referred to as trucks) and their systems.Examples of driverless industrial
Industrial trucks — Vocabulary — Part 1: Types of industrial trucks
This document establishes the vocabulary of industrial trucks.For the purposes of this document, industrial trucks are wheeled vehicles having at least three wheels with a powered or non-powered drivi
Information and documentation — A reference ontology for the interchange of cultural heritage information
ISO 21127:2014 establishes guidelines for the exchange of information between cultural heritage institutions.
Information processing systems - Computer graphics - Graphical Kernel System for Three Dimensions (GKS-3D) functional description
This document specifies a set of functions for computer graphics programming, i.e.
Information security controls for the energy utility industry
Effective information security in the process control domain of the energy utility sector can be achieved by establishing, implementing, monitoring, reviewing and, if necessary, improving the appli
Information security controls for the energy utility industry
Effective information security in the process control domain of the energy utility sector can be achieved by establishing, implementing, monitoring, reviewing and, if necessary, improving the appli
Information security management guidelines for cyber insurance
This document provides guidelines for adopting cyber insurance as a risk treatment option to manage the impact of a cyber incident within the organization’s information security risk management fra
Information security management guidelines for cyber insurance
This document provides guidelines for adopting cyber insurance as a risk treatment option to manage the impact of a cyber incident within the organization’s information security risk management fra
Information security — Lightweight cryptography — Part 2: Block ciphers
This document specifies three block ciphers suitable for applications requiring lightweight cryptographic implementations:
Information security — Lightweight cryptography — Part 2: Block ciphers
This document specifies three block ciphers suitable for applications requiring lightweight cryptographic implementations:
Information security — Lightweight cryptography — Part 7: Broadcast authentication protocols
This document specifies broadcast authentication protocols, which are protocols that provide data integrity and entity authentication in a broadcast setting, i.e.
Information security — Lightweight cryptography — Part 7: Broadcast authentication protocols
This document specifies broadcast authentication protocols, which are protocols that provide data integrity and entity authentication in a broadcast setting, i.e.
Information security, cybersecurity and privacy protection
The development of standards for the protection of information and ICT. This includes generic methods, techniques and guidelines to address both security and privacy aspects, such as:
Information security, cybersecurity and privacy protection
The development of standards for the protection of information and ICT. This includes generic methods, techniques and guidelines to address both security and privacy aspects, such as:
Information technology - 120 mm (4,7 Gbytes per side) and 80 mm (1,46 Gbytes per side) DVD rewritable disk (DVD-RAM)
ISO/IEC 17592:2004 specifies the mechanical, physical and optical characteristics of an optical disk, identified as DVD Rewritable Disk (DVD-RAM), to enable interchange of such disks.
Information technology - Data usage - Guidance for data usage
This standard delivers a guidance for data usage.
Information technology -- Biometric application programming interface -- Part 1: BioAPI specification
ISO/IEC 19784-1:2018 defines the Application Programming Interface (API) and Service Provider Interface (SPI) for standard interfaces within a biometric system that support the provision of that bi
Information technology -- Biometric application programming interface -- Part 1: BioAPI specification
ISO/IEC 19784-1:2018 defines the Application Programming Interface (API) and Service Provider Interface (SPI) for standard interfaces within a biometric system that support the provision of that bi
Information technology -- Biometric data interchange formats -- Part 13: Voice data
ISO/IEC 19794-13:2018 specifies a data interchange format that can be used for storing, recording, and transmitting digitized acoustic human voice data (speech) assumed to be from a single speaker
Information technology -- Biometric data interchange formats -- Part 13: Voice data
ISO/IEC 19794-13:2018 specifies a data interchange format that can be used for storing, recording, and transmitting digitized acoustic human voice data (speech) assumed to be from a single speaker
Information technology -- Biometric Identity Assurance Services -- Part 1: BIAS services
ISO/IEC 30108-1:2015 defines the architecture, operations, data elements, and basic requirements for biometric identity assurance services, a framework for the implementation of generic, biometric-
Information technology -- Biometric Identity Assurance Services -- Part 1: BIAS services
ISO/IEC 30108-1:2015 defines the architecture, operations, data elements, and basic requirements for biometric identity assurance services, a framework for the implementation of generic, biometric-
Information technology -- Biometric performance testing and reporting -- Part 6: Testing methodologies for operational evaluation
This standard was last reviewed and confirmed in 2017.
Information technology -- Biometric performance testing and reporting -- Part 6: Testing methodologies for operational evaluation
This standard was last reviewed and confirmed in 2017.
Information technology -- Biometric presentation attack detection -- Part 1: Framework
The purpose of ISO/IEC 30107-1 is to provide a foundation for PAD through defining terms and establishing a framework through which presentation attack events can be specified and detected so that
Information technology -- Biometric presentation attack detection -- Part 1: Framework
The purpose of ISO/IEC 30107-1 is to provide a foundation for PAD through defining terms and establishing a framework through which presentation attack events can be specified and detected so that
Information technology -- Biometric sample quality -- Part 1: Framework
ISO/IEC 29794-1:2016, for any or all biometric sample types as necessary, establishes the following:
Information technology -- Biometric sample quality -- Part 1: Framework
ISO/IEC 29794-1:2016, for any or all biometric sample types as necessary, establishes the following:
Information technology -- Biometric System-on-Card -- Part 2: Physical characteristics
ISO 17839-2:2015 defines the following:
- Dimensions of a Biometric System-on-Card type S1 and type S2;
- Position and size of the biometric capture device;
Information technology -- Biometric System-on-Card -- Part 2: Physical characteristics
ISO 17839-2:2015 defines the following:
- Dimensions of a Biometric System-on-Card type S1 and type S2;
- Position and size of the biometric capture device;
Information Technology -- Biometrics -- Guide on designing accessible and inclusive biometric systems
Procurements of biometric systems often stipulate requirements for the systems to be inclusive and make provision for exception handling.
Information Technology -- Biometrics -- Guide on designing accessible and inclusive biometric systems
Procurements of biometric systems often stipulate requirements for the systems to be inclusive and make provision for exception handling.
Information technology -- Biometrics -- Multimodal and other multibiometric fusion
ISO/IEC TR 24722:2015 contains descriptions of and analyses of current practices on multimodal and other multibiometric fusion, including (as appropriate) references to more detailed descriptions.
Information technology -- Biometrics -- Multimodal and other multibiometric fusion
ISO/IEC TR 24722:2015 contains descriptions of and analyses of current practices on multimodal and other multibiometric fusion, including (as appropriate) references to more detailed descriptions.
Information technology -- Biometrics used with mobile devices
ISO/IEC TR 30125:2016 provides guidance for developing a consistent and secure method of biometric (either alone or supported by non-biometric) personalization and authentication in a mobile enviro
Information technology -- Biometrics used with mobile devices
ISO/IEC TR 30125:2016 provides guidance for developing a consistent and secure method of biometric (either alone or supported by non-biometric) personalization and authentication in a mobile enviro
Information Technology -- Cloud Computing -- Common Technologies and Techniques
Cloud computing is described at a high, conceptual level in the two foundational standards ISO/IEC 17788 Cloud computing – Overview and vocabulary and ISO/IEC 17789 Cloud computing – Reference Arch
Information Technology -- Cloud Computing -- Common Technologies and Techniques
Cloud computing is described at a high, conceptual level in the two foundational standards ISO/IEC 17788 Cloud computing – Overview and vocabulary and ISO/IEC 17789 Cloud computing – Reference Arch
Information technology -- Cloud computing -- Concepts and terminology
This document provides a consolidate set of concepts, terms, terminology and definitions extracted from the ISO/IEC cloud computing standards, including, but not limited to, ISO/IEC 17788, ISO/IEC
Information technology -- Cloud computing -- Concepts and terminology
This document provides a consolidate set of concepts, terms, terminology and definitions extracted from the ISO/IEC cloud computing standards, including, but not limited to, ISO/IEC 17788, ISO/IEC
Information technology -- Cloud computing -- Edge computing landscape
Edge computing is increasingly used in systems that deal with aspects of the physical world.
Information technology -- Cloud computing -- Edge computing landscape
Edge computing is increasingly used in systems that deal with aspects of the physical world.
Information technology -- Cloud computing -- Framework of trust for processing of multi-sourced data
This document describes a framework of trust for the processing of multi-sourced data that includes data use obligations and controls, data provenance, chain of custody, security and immutable proo
Information technology -- Cloud computing -- Framework of trust for processing of multi-sourced data
This document describes a framework of trust for the processing of multi-sourced data that includes data use obligations and controls, data provenance, chain of custody, security and immutable proo
Information technology -- Cloud computing -- Guidance for policy development
This document provides guidance on the use of international standards as a tool in the development of those policies that govern or regulate cloud service providers (CSPs) and cloud services, and t
Information technology -- Cloud computing -- Guidance for policy development
This document provides guidance on the use of international standards as a tool in the development of those policies that govern or regulate cloud service providers (CSPs) and cloud services, and t
Information technology -- Cloud computing -- Interacting with cloud service partners (CSNs)
The purpose of this technical report is to expand on the description of the interactions between cloud service partners (CSNs) and cloud service customers (CSCs), and between CSNs and cloud service
Information technology -- Cloud computing -- Interacting with cloud service partners (CSNs)
The purpose of this technical report is to expand on the description of the interactions between cloud service partners (CSNs) and cloud service customers (CSCs), and between CSNs and cloud service
Information technology -- Cloud computing -- Interoperability and portability
ISO/IEC 19941 specifies cloud computing interoperability and portability types, the relationship and interactions between these two cross-cutting aspects of cloud computing and common terminology a
Information technology -- Cloud computing -- Interoperability and portability
ISO/IEC 19941 specifies cloud computing interoperability and portability types, the relationship and interactions between these two cross-cutting aspects of cloud computing and common terminology a
Information technology -- Cloud computing -- Overview and vocabulary
ISO/IEC 17788 provides an overview of cloud computing along with a set of terms and definitions. It is a terminology foundation for cloud computing standards.
Information technology -- Cloud computing -- Overview and vocabulary
ISO/IEC 17788 provides an overview of cloud computing along with a set of terms and definitions. It is a terminology foundation for cloud computing standards.
Information technology -- Cloud computing -- Reference architecture
ISO/IEC 17789 specifies the cloud computing reference architecture (CCRA).
Information technology -- Cloud computing -- Reference architecture
ISO/IEC 17789 specifies the cloud computing reference architecture (CCRA).
Information technology -- Cloud computing -- Service level agreement (SLA) framework -- Part 1: Overview and concept
ISO/IEC 19086-1 seeks to establish a set of common cloud SLA building blocks (concepts, terms, definitions, contexts) that can be used to create cloud Service Level Agreements (SLAs).